| Elife-Drive FAMILY |
|---|
 HR Series |
 SR Series |
 MR Series |
 MP Series |
Elife-Drive HR Series is designed to be easier to install and use. A wide range of programmable parameters allow you to customize your system for your needs.
Four Quadrant Regenerative Operation
Space Vector Modulation Technology
Sinusoidal and Trapezoidal Commutation Methods
Programmable Gain Setting
Fully Configurable Velocity and Position Limits
On-the-Fly Mode and Gain Set Switching
Emergency input and Deceleration Ramp
The main key features of Elife-Drive HR Series
Designed to drive from 24 V to 96 V Brushless, Brushed and AC ServoMotors.
The different types of feedback are supported: Absolute Resolver, SSI Absolute Encoder, SinCos Absolute Encoder, Hall Sensors, Incremental Encoder, Tachometer
Advanced algorithms for predictive speed and torque control.
Elife-Drive integrates a high performance controller with the latest generation of MOSFETs: high efficiency and low consumption.
CANopen® communication protocol: CiA® DS301 – CiA® DSP402 (Interface Profile Velocity, Profile Position and Torque Profile Mode).
Electromagnetic Holding Brake Output with DPR System (Dynamic Power Reduction)
Telemetry of the Internal functions
Integrated Fuse Holder (only up 80 V)
European Conformity, and designed and tested in accordance with the EMC emission (EN 61000-6-4) and immunity (EN 61000-6-2) standards.
Choose your Model:
| Drive Type | Continuous RMS Phase Current * | Nominal Voltage Supply (Operating Range) | Max. Available Power |
|---|---|---|---|
 H2424-3-X | up to 150 Arms | 24 V (18 Vmin - 35 Vmax ) | 3 KW |
| H2436-3-X | up to 150 Arms | 36 V (18 Vmin - 55 Vmax ) | 3 KW |
| H2448-2-X | up to 100 Arms | 48 V (18 Vmin - 70 Vmax ) | 2 KW |
| H2448-3-X | up to 150 Arms | 48 V (18 Vmin - 70 Vmax ) | 3 KW |
| H4896-6-X | up to 150 Arms | 96 V (43 Vmin - 150 Vmax ) | 6 KW |
* The value of the maximum continuous (60 min) RMS phase current is ensured with an appropriate heat sink
. Datasheet Application Reference Manual
Accessories and Tools for Elife-Drive:
DC-DC Converters 
Diagnostic Display
Input/Output Connections:
2 Programmable High Powered Digital Outputs
1 Programmable 0÷10 V 12-bit Analog Input
5 Programmable Digital Inputs Single Ended
4 Programmable Digital Outputs Single Ended
Haven’t found what you’re looking for yet ? Have a look at Elife-Drive SLP Series for lower power model or at Elife-Drive M Series for higher power model. for any demand or technical questions.
